AB IPBox Prismcube Ruby Linux HD Satellite Receiver


AB IPBox Prismcube Ruby Linux HD Satellite Receiver, Linux based Enigma 2 twin HDTV satellite receiver, supports XBMC and PVR recording via SATA/E-SATA/USB HDD (HDDs not included). AB IPBox Prismcube Ruby Features 2 Common Interfaces, 2 smartcard readers, user- friendly interface, VFD display, Ethernet, HbbTV, regular new Add-Ons and USALS.

AB IPBox Prismcube Ruby Linux HD Satellite Receiver

Specifications
– Open-source Linux operating system (Enigma2)
– Fast CPU
– Pluggable tuner (2 x DVB-S/S2 fitted), C and T also available to purchase
– Add an internal SATA HDD 2.5/3.5″ for PVR/Timeshift
– E-SATA and USB PVR/Timeshift
– Playback of various media types
– Universal remote control with QWERTY keyboard
– Large memory (512MB)
– Low power consumption in Standby (0.5w)
– 2 smartcard readers
– 2 Common Interface slots
– Front panel USB 2.0 port/2 rear USB 2.0 ports
– 12 digit VFD front panel display
– Front buttons: Standby, vol +/-, channel +/-
– 1 Scart socket
– 1 analogue Cinch video socket, L/R analogue Cinch audio sockets
– 1 HDMI socket
– Digital optical SPDIF output
– Ethernet port
– RS232 port
– Automatic fan control
– E-SATA port
– Power main range: 100-250/50-60V/Hz
– Power consumption max: 42W, typ. operational: 15W
– FEC, de-multiplexer: DVB-S2/S/C/T standard
– Video resolution: CCLR 601 (720×576 lines), 576p, 720p, 1080i
– Video decoding: MPEG2, MPEG4 compatible
– Video S/N: >53dB
– Audio decoding: AC3, MPEG4 (AAC-HE). MPEG1, Layer 1, 2 and 3
– Audio sampling rate: 32/4.1/48KHz
– Audio S/N: >65dB
– LNB supply (horiz./vert.): 14/18V; Max.400mA
– Signal control: 22KHz, ToneBurst
– DiSEqC 1.0/1.1/1.2 and USALS
– CPU: PNX8496-1250DMIPS
– NAND Flash: 4Gb
– DRAM: 4Gb * 8bit
– Connector type: IF
– Frequency range: 950~2150 MHz (satellite)
– LNB voltages: 13/18v
– Dual tuner support: YES
– WiFi: YES – Built-in Wi-Fi system
– 3D graphics: YES
– OpenGL ES2.0: YES
– Rear RF in: YES
– Rear RF out: YES (with dual tuner support)
– Loop through: YES (with dual tuner support)
– Power cord: Adaptor 12V DC 3.5A
– UI: XBMC
– Loader version: 1
– USB upgrade: YES
– Over-the-Internet upgrade: YES
– Ethernet upgrade: YES
– Max. channels: Over 10000EA
– EPG: YES
– OSD language: Support in XBMC
– Add-Ons: YES – various XBMC Add-Ons supported
– Browser: YES
– 3D graphics: YES
– HDD file system: FAT32, NTFS(read only)
– Flash file system: JFFS2 or YAFS2
– Media type: MKV, AVI, MP3, MP4
– DVB subtitiles: YES
– Teletext: YES
– Blind Scan: YES
– HDMI-CEC: YES

BinZou.Com © 2016