Eagle Box 1000S Linux Satellite TV Receiver

Eagle Box 1000S Linux satellite TV receiver, with 1 x Smartcard Reader. 250 MHz IBM PowerPC Processor 350 Mips, 2 LED status , Eagle Box 1000S Linux Operating System , satellite TV receiver Full automatic service scan, Supports directly bouquet lists indirect unlimited, Supports multiple LNB Switching control supports DiSEqC, Eagle Box 1 x Smartcard Reader, Unlimited channel lists for TV/Radio, SPDI/F nterface for digital bit stream out AC-3 / DTS, MPEG2 Hardware decoding, Channel change time 1 second, Fully adaptable OSD in many languages skin support, 100Mbit full duplex Ethernet Interface, satellite TV receiver Supports EPG electronic program guide, 1 x Scart-interfaces fully controlled by software.

Eagle Box, 1000S, Linux, Satellite TV Receiver

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL and NTSC
Video Formats 4:3 / 16:9
Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

Output: FBAS,RGB,S-VHS over OSD selectable

Frequency Range 950 .. 2150 MHz
Signal Level – 65 dBm .. – 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1

100 MBit compatible, bi-direktional interface
Function Update of Firmware and Preprogramming

LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-proof
LNB Voltage vertical 11,5V at 400mA
LNB Voltage horizontal 17,3V at 400mA
LNB shut-off at Standby-Mode

Count of active satellite position:
DiSEqC – Rotor Control

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

Serielle Interface RS 232:
Typ RS232 bidirectional
Bit rate 115,2 kBit/s max.
Plug Connector SUB-D-9
Function Update of Firmware and Preprogramming

Power consumption:
< 10W / 12V

Input voltage:
DC12V,alternating acurrent +/- 15%

Extern power supply:
110-240V AC / 50-60Hz / 0,6A
12V = / 1A

Ambient Temperature +15°C…+35°C
Humidity < 80%

BinZou.Com © 2016