MediaArt 7 Android Full HD Satellite Receiver

MediaArt 7 Android Full HD Satellite Receiver , USB, LAN , WiFi, Apps, DLNA , Flash,  Browser uvm, Full Compliant with DVB-S2 (HDTV), MediaArt 7 Android Powerful Media Player, Full Browsing with Flash Player Stable Streaming Protocol, Application Market, DLNA / Air Video

MediaArt, Android, Full HD


Input Connector F-type, IEC-169-24, Female
Input Frequency 950MHz to 2150MHz
Input Impedance 75O
Signal Level -65~-25dBm
LNB Power 13V/18V (Max 400mA with short circu
LNB Control DiSEqC 1.0 , 1.1 & 1.2, USALS
LNB Tone Switch 22KHz
Demodulation QPSK, 8PSK
InputSymbol Rate QPSK /1~55Msps, 8PSK /1~45Msps

A/V Decoder

Transport Stream MPEG-2 ISO/IEC 13818 MPEG2 MP@ML
Aspect Ratio 16:9
Audio Decoding MPEG/MusiCam Layer I & II Audio Mode Single channel/Dual channe Sampling 32, 44.1 and 48kHz
Video Resolution Video Resolution 960×540

Input / Output

Video/Audio (Stereo) Composite Video and Audio L/R (option)
HDMI Fully compliant with HDMI 1.3a (PAL / NTSC up to 1080p)
Ethernet 10/100BASE-T : RJ-45
Ethernet COM (Option) RS232C serial port USB 2xUSB 2.0 (WiFi Dongle and other purpose)


Main Chipset ARM Cortex-A9 600MHz (1250 DMIPS)
Flash Memory NAND 512MB Flash Memory


Operating System Android 2.3 Gingerbread
Internet Browser Webkit based Android full browser
Protocols Static, DHCP, HTTP(VOD), HLS(Live, VOD)
Graphics 3D/2D graphic H/W acceleration/Alpha blending
Flash Plug-in Adobe Flash Plug-in 10.3 (up to 480i video)
Upgrade Firmware upgrade by network Media

Media Support

Video Codec H.264(MPEG4-AVC, VC-1), MPEG2, DviX3/4/5
Audio Codec MP3, AAC, OGG, MPEG, MPEG Audio, Dolby
Power Supply
Input Voltage 12V DC, 1.6A Adaptor Type Wall mount Type (100 ~ 240Vac, 50/60Hz)
Power Consumption 19 W

Physical Specification

Size (W) 183 mm x (D) 132 mm x (H) 37.5 mm
Weight 284g
Operating Temp 0°C to + 45°C


MediaArt 7 Software  : Download

BinZou.Com © 2017